do you give instructions to do this and cost
Nov 23, 2011 at 2:43 PM
how do i change a/c bearing.
1996 GMC C1500
PAULY13
- MEMBER
- 1 POST
- FOLLOW
Advertisement
remove the serp belt. remove the nut in the clutch assembly.
use a puller to remove the clutch plate. once the plate is removed, there is an inner snap ring holding the pulley to the compressor. remove the connector for the clutch and use a rubber mallett to remove the pulley. press out the bearing and install the new one.
Roy
use a puller to remove the clutch plate. once the plate is removed, there is an inner snap ring holding the pulley to the compressor. remove the connector for the clutch and use a rubber mallett to remove the pulley. press out the bearing and install the new one.
Roy
Nov 23, 2011 at 2:58 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.