SPONSORED LINKS

Can I bypass a heater core?

Tiny
CROUTON229
  • MEMBER
  • 1996 FORD TAURUS
  • 150,000 MILES
Is there any simple way to bypass a heater core on a 1996 Ford Taurus, I have to drive it 4 hours away to get home. Not enough money for a tow truck.
Friday, December 23rd, 2011 AT 7:13 AM

2 Replies

Tiny
DRCRANKNWRENCH
  • MECHANIC
  • 3,380 POSTS
Disconnect one hose at the heater core connection at the firewall and disconnect the OTHER hose at the block where the 2 go in and come out. Take the hose you disconnected at the firewall and connect it to the block where you disconnected the OTHER hose. The OTHER hose will no longer carry fluid and the looped hose will bypass the heater core and run the fluid in and out of the engine block.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Friday, December 23rd, 2011 AT 7:30 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Another way is to disconnect the inlet and outlet hoses to the heater core and use stopper plugs to seal the two ports.
Was this
answer
helpful?
Yes
No
+1
Friday, December 23rd, 2011 AT 12:32 PM

Please login or register to post a reply.

Related Heater Heater Core Content

Heater Core Replacement
GUIDE
Heater Core Replacement
A heater core is positioned inside the car and is part of the HVAC system. Hot engine coolant is run through the core which air is blown through via the blower motor which ...
VIEW MORE

Sponsored links