With new plugs it runs for a little while

Tiny
ELVIS ARON
  • MEMBER
  • 1996 CHEVROLET CAMARO
  • 135,000 MILES
I have a 1996 camaro z28 with the ls1 in it I changed the spark plugs in it and it ran fine for a little bit but now it wont start but it will crank over and it back fires when it tries to start what can it be? I changed the spark plugs they had carbon on them, after changing them it started right up drove it about 20 miles turned it off and let it sit for 2 days and now it wont start up. But it will crank up and it backfires when it tries to start do u think it could be the timing, or the opti spark that went out?
Monday, January 16th, 2012 AT 3:05 AM

6 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Check the fuel pressure with a gauge if okay-check for spark
Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 3:15 AM
Tiny
ELVIS ARON
  • MEMBER
  • 6 POSTS
It is sensinf a code that says ignition misfire or malfunction
Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 4:28 AM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
What is the exact code its giving-
Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 4:31 AM
Tiny
ELVIS ARON
  • MEMBER
  • 6 POSTS
The code is p1371 and says manafactor ignation system or system mifire
Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 4:41 AM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
P1371

Try changing the Ignition Control (IC) Module you are getting 4x Reference too few pulses
Was this
answer
helpful?
Yes
No
Monday, January 16th, 2012 AT 9:31 AM
Tiny
ELVIS ARON
  • MEMBER
  • 6 POSTS
So I need to change the ignition module then
Was this
answer
helpful?
Yes
No
+1
Monday, January 16th, 2012 AT 3:20 PM

Please login or register to post a reply.

Sponsored links