SPONSORED LINKS

1995 Infiniti Q45 Cuts off at red lights

Tiny
DACON
  • MEMBER
  • 1995 INFINITI Q45
  • 2WD
  • AUTOMATIC
  • 90,000 MILES
One moment it runs good then all a sudden it will cut off at a red light last night I had to crank it up 4 times before I got it to go then it ran good all the way home, Have replaced fuel filter, Mass Flow Sensor, and also had the Throttle body cleaned by experts, but it is still doing it. Please help.
SPONSORED LINKS
Monday, December 2nd, 2013 AT 2:55 AM

7 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Are you getting any trouble codes?
Was this
answer
helpful?
Yes
No
Monday, December 2nd, 2013 AT 5:56 AM
Tiny
DACON
  • MEMBER
  • 5 POSTS
No trouble codes they say Had it in two different shops and it runs good with them they say their is no computer to hook up to. All they do is crank it up and let it run. Then they nothing wrong, had the trotter body clean twice and the fuel filter replace.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 14th, 2014 AT 7:22 AM
Tiny
DACON
  • MEMBER
  • 5 POSTS
No trouble codes, Had it in two different shops and it runs good with them they say their is no computer to hook up to. All they do is crank it up and let it run. Then they say nothing wrong, had the trotter body clean twice and the fuel filter replace.
Was this
answer
helpful?
Yes
No
Tuesday, January 14th, 2014 AT 7:25 AM
Tiny
DACON
  • MEMBER
  • 5 POSTS
1995 Infiniti cuts off at red lights No trouble codes, Had it in two different shops and it runs good with them they say their is no computer to hook up they tell me the hook up did not come out until 1997. All they do is crank it up and let it run. Then they say nothing wrong, had the trotter body clean twice and the fuel filter replace. And now at 40 to 45 mph it will start to kick back, some times on take off it will be sluggish but not every time.
Was this
answer
helpful?
Yes
No
Tuesday, January 14th, 2014 AT 7:43 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Even earlier models do have OBD connectors only special adapters are required. You would need to get a shop that has the appropriate scan tool.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, January 19th, 2014 AT 12:21 PM
Tiny
DACON
  • MEMBER
  • 5 POSTS
Thanks for the information maybe I can get some where now.
Was this
answer
helpful?
Yes
No
Sunday, January 19th, 2014 AT 3:55 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
You're welcome.
Was this
answer
helpful?
Yes
No
Thursday, January 30th, 2014 AT 5:33 AM

Please login or register to post a reply.

Related Electrical Shut Down Content

Sponsored links