So what part of it are you trying to fix?You have to give more detail's so i can help you.

Answered by saturntech9 (expert)
23,155 answers provided

im not sure it wont start

Response from 95cheve
2 questions asked

If its a CPI system-you need to remove the upper plenum to get at it-Won't start could be a fuel or spark issue-Do below

Get a helper disconnect a sparkplug wire or 2 and ground it to the engine at least 3/16 away from ground -have helper crank engine over-do you have a snapping blue spark? If so-you have a fuel related problem,Do you hear the fuel pump come On when you turn key on? If not check fuel pump fuse and fuel pump relay if so, check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light. No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it

Answered by rasmataz
68 questions asked

Thanks for the assist rasmataz you need to first see what your lacking before making any repair's.Spark fuel pressure injector pulse etc.Let us know what you find.

Answered by saturntech9 (expert)
23,155 answers provided