Just replaced battery, now car wont turn over!

Tiny
NANA91945
  • MEMBER
  • 1994 SATURN SC2
  • 16,000 MILES
No clicking to selinoid, panel lights work, HELP this dumb blond, please!
Saturday, December 3rd, 2011 AT 6:16 PM

4 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
**No crank at all/nothing/nada when key is engage to starting position

Could be a blown fusible link, the starter, starter relay, clutch switch/park and neutral switch/transmission position switch and ignition switch assuming the battery condition and connections are good. Note:If it doesn't apply disregard.
Was this
answer
helpful?
Yes
No
Saturday, December 3rd, 2011 AT 6:28 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Just to add to this one did you make sure the battery cables are clean and tight?Also did you check all the fuses?Especially the big green ones in the underhood fuse box?Do the lights dim or go out while trying to start it?Do you have a test light and know how to use one?Also do you have a automatic or manual transmission?
Was this
answer
helpful?
Yes
No
Saturday, December 3rd, 2011 AT 6:49 PM
Tiny
NANA91945
  • MEMBER
  • 2 POSTS
Had a friend look at it, he hit the "valet switch", now it works! Feel like a fool, but glad! Thanks sweetheart, fer the help. Nancy
Was this
answer
helpful?
Yes
No
Saturday, December 3rd, 2011 AT 7:21 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Alright sounds good you had a aftermarket alarm that went off and disabled your starter circuit you left that part out lol. But glad you got it all figured out. Your welcome thats what were here for to help people with there cars.
Was this
answer
helpful?
Yes
No
Saturday, December 3rd, 2011 AT 7:26 PM

Please login or register to post a reply.

Sponsored links