SPONSORED LINKS

1994 Chevy Camaro Z28 factory alarm

Tiny
2CP-ARCHIVES
  • MEMBER
  • 1994 CHEVROLET CAMARO
  • V8
  • 2WD
  • AUTOMATIC
  • 104,518 MILES
1994 Chevy Camaro Z28 mileage: 104,525. When I turn off my factory alarm and try to start my car, the alarm immediately resets and I am unable to get the engine to turn over. The security light on the dash flashes. I disconnected the alarm all together yet the problem continues. Is there anything that I can do to get my car to start?
SPONSORED LINKS
Tuesday, November 9th, 2010 AT 8:37 PM

1 Reply

Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,542 POSTS
Your problem is most likely due to a faulty vehicle anti-theft module which needs to be replaced before the car will start. It is an integral part of your car and cannot be disconnected.
Was this
answer
helpful?
Yes
No
Tuesday, November 9th, 2010 AT 8:39 PM

Please login or register to post a reply.

Related Disarm Content

Security System Reset
GUIDE
Security System Reset
Need to reset the security light in your car? If the security light is blinking the immobilizer system is enabled and will not allow the car to start.

Sponsored links