1993 Mazda Eunos Configure Remote for Central Locking

Tiny
UTSAV2424
  • MEMBER
  • 1993 MAZDA EUNOS
  • V6
  • AUTOMATIC
  • 9 MILES
Hello,
I have Mazda Eunos 30x
and I want to configure my remote to the central locking system.
I have seen that in Mazda, in most of the cars there is some steps like to on and off ignition switch and opening and closing door 3 time to configure remote,
I just wanted to know whats the system in my Car.

Watining for your reply.
utsavparekh24@gmail. Com
plz. Reply me on this mail address.
Thanks
Thursday, December 11th, 2014 AT 6:10 AM

1 Reply

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Not 100% sure if this is correct for you model but try this.

1. All doors closed, but unlocked.
2. Open drivers door, leave it open.
3. Put key in ignition, and turn it between ON and LOCK 3 times.
4. Remove key from ignition.
5. Press the drivers door switch 3 times (the switch that operates the courtesy light).
6. The doors should lock and unlock.
7. Press any button on the remote twice.
8. The doors should lock then unlock again.
Was this
answer
helpful?
Yes
No
Friday, December 12th, 2014 AT 2:47 PM

Please login or register to post a reply.

Sponsored links