SPONSORED LINKS

1993 Explorer wiper motor

Tiny
903ASP1
  • MEMBER
  • 1993 FORD EXPLORER
  • 6 CYL
  • 4WD
  • AUTOMATIC
I am trying to change the wiper motor on my 1993 Explorer, but I see no screws to remove cowling. How do I remove cowling, to remove wiper motor?
Saturday, March 19th, 2011 AT 8:32 PM

3 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Here are the removal and installation procedures. Seems the cowl need not be removed.

Removal & Installation

1. Turn wipers on. Use ignition switch to stop wipers when blades are vertical. Unplug wiper motor connector. Remove right wiper arm and blade. Disconnect negative battery cable. Remove right pivot nut. Allow linkage to drop into cowl.

2. Remove linkage access cover. Reach through access cover opening and unsnap wiper motor clip. Push clip away from linkage until it clears nib on crank pin. Remove clip from linkage. Disengage wiper linkage from motor crank pin. Remove wiper motor retaining screws and motor. To install, reverse removal procedure.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 20th, 2011 AT 3:18 PM
Tiny
903ASP1
  • MEMBER
  • 13 POSTS
Thanks KHLow2008. I'm sure this info will now make it possible for me to remove/replace faulty wiper motor. Can't operate blades to get them vertical, because gears in motor are stripped, and they don't move, which is why I have to replace motor. Might have moved wiper blades by hand, but I have already dis-connected everything. As I stated though, I now have a better idea on how to remove motor. Your help was greatly appreciated :)
Was this
answer
helpful?
Yes
No
Sunday, March 20th, 2011 AT 4:02 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
You're welcome. Have a nice day.
Was this
answer
helpful?
Yes
No
-1
Sunday, March 20th, 2011 AT 5:41 PM

Please login or register to post a reply.

Related Wiper Motor Replace/Remove Content

VIEW MORE

Sponsored links