1992 Mercury Cougar Transmission

Tiny
TRUBZ
  • MEMBER
  • 1992 MERCURY COUGAR
  • 3.8L
  • V6
  • 2WD
  • AUTOMATIC
  • 185,000 MILES
The transmission drives forward with no problems but reverse not working also it doesn't matter what gear I select it goes forward, example I put the gear selector in reverse it goes forward if I put in neutral it goes forward. The neutral safety switch is working correctly because it starts in park and in neutral only. Hopefully this is an easy adjustment fix but any help would be greatly appreciated.

Thanks
Saturday, March 1st, 2014 AT 10:49 PM

5 Replies

Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
Id say you've got a problem in the valve body making it stuck in drive. Since the neutral safety works we know the selector and linkage are working. Does it try to move in park if you push the gas or is it out of gear then?
Was this
answer
helpful?
Yes
No
Sunday, March 2nd, 2014 AT 6:30 AM
Tiny
TRUBZ
  • MEMBER
  • 5 POSTS
Its out of gear when I put it in park
Was this
answer
helpful?
Yes
No
Sunday, March 2nd, 2014 AT 10:51 AM
Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
Ok that's good. I think you've got problems in the valve body making it go into drive in all other positions. Id call a trans shop and tell them your problem and get their advice
Was this
answer
helpful?
Yes
No
Sunday, March 2nd, 2014 AT 3:29 PM
Tiny
TRUBZ
  • MEMBER
  • 5 POSTS
Will do thanks for helping me out much appreciated
Take Care
Was this
answer
helpful?
Yes
No
Sunday, March 2nd, 2014 AT 4:03 PM
Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
Sure. Good luck. Its important to be sure with a transmission to avoid wasting a lot of money
Was this
answer
helpful?
Yes
No
Tuesday, March 4th, 2014 AT 4:43 PM

Please login or register to post a reply.

Sponsored links