how do you set valve timming 2.3 engine
Nov 17, 2012 at 3:52 PM
1992 Ford Ranger You Set Valve Timming 2 3 Engine
1992 FORD RANGER
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Advertisement
REMOVAL
Open and secure hood.
Install protective fender covers.
Loosen alternator assembly and remove bolts.
Drain cooling system.
Disconnect upper radiator hose and position aside.
Remove water pump pulley.
Remove crankshaft pulley.
Remove timing belt outer cover retaining bolt and cover.
Loosen belt tensioner pulley assembly.
Remove timing belt.
INSTALLATION
Timing Belt And Components
Install new timing belt.
Timing Pointer Locations
Spring And Adjustment Bolt
Release timing belt tensioner pulley.
Set camshaft timing.
Install timing belt outer cover and retaining bolt.
Install water pump pulley.
Install crankshaft pulley.
Position the alternator. Adjust the alternator belt and tighten the bolts.
Connect upper radiator hose.
Refill cooling system.
Start engine and inspect for leaks.
Check ignition timing and adjust if necessary.
Open and secure hood.
Install protective fender covers.
Loosen alternator assembly and remove bolts.
Drain cooling system.
Disconnect upper radiator hose and position aside.
Remove water pump pulley.
Remove crankshaft pulley.
Remove timing belt outer cover retaining bolt and cover.
Loosen belt tensioner pulley assembly.
Remove timing belt.
INSTALLATION
Timing Belt And Components
Install new timing belt.
Timing Pointer Locations
Spring And Adjustment Bolt
Release timing belt tensioner pulley.
Set camshaft timing.
Install timing belt outer cover and retaining bolt.
Install water pump pulley.
Install crankshaft pulley.
Position the alternator. Adjust the alternator belt and tighten the bolts.
Connect upper radiator hose.
Refill cooling system.
Start engine and inspect for leaks.
Check ignition timing and adjust if necessary.
Nov 17, 2012 at 7:12 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.