2CarPros - Car Questions & Answers

1992 Acura CL Repair Question


Topics covered: Water pump, Engine.
Mileage: 1,983 miles.

Asked on March 14, 2013

Acura CL Water pump Problem

How to change a conpresser and water pump and were they are located in the engine
Avatar Asked by (pending member)

Answer

Replied on March 20, 2013

Im assuming the AC compressor? If the car is a V6 the water pump is located in the picture below. I attached a picture of the AC compressor as well. The pressure will need to be relieved from the system. Those hoses disconnected and then there are 4 bolts holding it onto the block. Make sure to release the tention on the belt before going too far.

The waterpump is a bit more tricky to do. Here is a good guide.

http://www.justanswer.com/acura/39lzb-doing-timing-belt-1997-acura-3-0cl-need-complete.html

If this helps, feel free to donate.

Tiny Answered by blaze45 (expert)
395 answers provided
Replied on March 21, 2013

Here is the AC compressor

Tiny Answered by blaze45 (expert)
395 answers provided