1991 Suzuki Mehran car jearking

Tiny
SAJID203
  • MEMBER
  • 1991 SUZUKI MEHRAN
  • 3 CYL
  • 4WD
  • MANUAL
  • 60,000 MILES
When I change the gear means high to low speed and low to high I gives accelerator then car take jerk I don't know why please help me what is the problem
Tuesday, April 15th, 2014 AT 5:34 PM

9 Replies

Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Check the spark plugs and wires.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, April 16th, 2014 AT 8:02 AM
Tiny
SAJID203
  • MEMBER
  • 7 POSTS
Can I change new spark plugs?
Or
can I change ignition coil?
For better and smooth driving and low fuel consumption.
Was this
answer
helpful?
Yes
No
Wednesday, April 16th, 2014 AT 2:55 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
The choice is yours but you need to find out what is wrong first.
Was this
answer
helpful?
Yes
No
Thursday, April 17th, 2014 AT 6:22 AM
Tiny
SAJID203
  • MEMBER
  • 7 POSTS
When I start the car car in neutral gear car gives jerk time to time and after acceleration it is going smooth but not 100% and also in first gear ruining again car gives jerk time to time why sir?
Was this
answer
helpful?
Yes
No
Friday, April 18th, 2014 AT 8:03 AM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
You were told to check the spark plugs and wires, have you done so?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, April 22nd, 2014 AT 7:09 AM
Tiny
SAJID203
  • MEMBER
  • 7 POSTS
I cleaned the spark plugs and reinstall and drive smoothly but after 5. 6 days again facing previous problem and car gives misfire and little bit back fire now what I do?
Was this
answer
helpful?
Yes
No
Sunday, April 27th, 2014 AT 11:29 AM
Tiny
SAJID203
  • MEMBER
  • 7 POSTS
Dear sir I changed the spark plugs and air filter now I drive my car smooth without jerking.
Was this
answer
helpful?
Yes
No
Wednesday, April 30th, 2014 AT 1:41 PM
Tiny
SAJID203
  • MEMBER
  • 7 POSTS
Sir
now I want to adjust the tappets of my car plz tell me easy technique.
Thanks
Was this
answer
helpful?
Yes
No
Wednesday, April 30th, 2014 AT 1:43 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
There are no easy technique for valve adjustment.

You need to remove the valve cover and turn the the engine to TDC at compression for cylinder #1 and start from there.
Was this
answer
helpful?
Yes
No
+1
Sunday, May 18th, 2014 AT 6:59 AM

Please login or register to post a reply.

Related General Content

GUIDE
Inquire Here

Sponsored links