Instrument Cluster Circuit Board Interchangeability

1991 PLYMOUTH VOYAGER
150,000 MILES
Avatar
WFRANKB
  • MEMBER
  • 1 POST
The dealer's mechanic said that the cluster printed circuit board was faulty, and he couldn't fix it because the repair parts for '91 Chrysler products were no longer available. I located a used circuit board at an auto salvage yard, but the part number on it is not the same as on the one in my van. The part # of mine is 4773077, and the one I located is part # 4517807 followed by Rev D. Are these two boards interchangeable or not? Will the used one work in my van? Thanks, WFrankB
Oct 4, 2011 at 7:35 PM
Advertisement
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
you need exact matches on the part number. a used one will work if it is any good.
check with a dealer parts department and see if the part number from yours was super ceded by the other one you have.

Roy
Oct 4, 2011 at 7:38 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.