Transmission/torque converter

Tiny
TOPAZGMB
  • MEMBER
  • 1991 FORD TEMPO
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 197,000 MILES
Hi, i'm back. I have a 91 ford tempo that we just replaced the tranny on about a week ago. And the car is doing the same thing before we put the tranny in, so with further investigating we beleive it the torque converter that we did not replace. So my question is how do you remove the torque from the flexplate that goes to the engine. There no room to get to the bolts is there a special tool or trick. If anyone knows please help, Thank you
Monday, January 10th, 2011 AT 11:00 PM

3 Replies

Tiny
DAVE'S BIG BACKYARD!
  • MECHANIC
  • 262 POSTS
You have to take the starter out and go through the starter hole, but there should have a little plate you take off so you can get a wrench on it.
Was this
answer
helpful?
Yes
No
Tuesday, January 11th, 2011 AT 2:22 AM
Tiny
TOPAZGMB
  • MEMBER
  • 8 POSTS
Hi, thank you for responding. It will be a few days till we can get back to the car, but I will let you know what happened. Again thank you
Was this
answer
helpful?
Yes
No
Tuesday, January 11th, 2011 AT 4:54 PM
Tiny
DAVE'S BIG BACKYARD!
  • MECHANIC
  • 262 POSTS
Hope I helped.
Was this
answer
helpful?
Yes
No
Tuesday, January 11th, 2011 AT 11:00 PM

Please login or register to post a reply.

Sponsored links