Pontiac Sunbird Injector

Tiny
WUTSUPY
  • MEMBER
  • 1990 PONTIAC SUNBIRD
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 90,000 MILES
I own a 1990 Pontiac Sunbird and 2 years ago the car stopped running, it first wouldnt start one day than the next it did than it completly died. I than left the car alone for 2 months. I checked the car over and realized the fuel pump was not on so I repaced the fuel pump than the relay than the oil pressure switch

. When these did not work I took the car in to my school. This was a few months ago. Me and my friend than just decided to bring a hot wire to the pump. It now pumps fuel to the throttle body but now wont inject the gas in to the engine. So we tested for power and we got juice coming to the injector but it wouldnt inject so we cut the blue wire and grounded it to the frame. The car now injects gas but it floods it self out. I realy need help, winter is coming up and this is my old dependable car.
Monday, November 15th, 2010 AT 7:33 PM

5 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Your problem is coming from the injector ground driver circuit on the computer
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 8:59 PM
Tiny
WUTSUPY
  • MEMBER
  • 59 POSTS
Ok, im no pro at all I swear, what exactly in the ground driver circuit?
Was this
answer
helpful?
Yes
No
Monday, November 15th, 2010 AT 9:09 PM
Tiny
WUTSUPY
  • MEMBER
  • 59 POSTS
Ok, I asked around and I was told the single comes from the crank shaft sensor, does that make sence to any one? Ill open it up and look at whats going on. Thanks and I also need to know were this sensor is, according to my book, it is under the belt cover on the left of the engine? Does this make sence to anyone, also there are wires running into the cover so it does seem to make sence, Thanks for reading about my issues
Was this
answer
helpful?
Yes
No
Tuesday, November 16th, 2010 AT 5:07 PM
Tiny
VERN1939
  • MEMBER
  • 15 POSTS
I DOTN HAVE A SENSOR FOR THE CRANK EITHER 1991 PONTIAC SUNBIRD 2.0
FLOODING ALL THE TIME NEW THROTTLE BODY FUEL SENSOR, STILL FLOODING
HOW SO I FIND OUT MORE ABOUT THE "DRIVER" BIT?

SHADE TREE VERN
Was this
answer
helpful?
Yes
No
Saturday, November 20th, 2010 AT 5:26 PM
Tiny
WUTSUPY
  • MEMBER
  • 59 POSTS
Ok I was told to check the ignition module, how do I pull it out, and more importantly, how do I test it?.A few minutes latter, I just pulled it out, on the side with 3 prongs I get power to 2 of the 3 prongs, the one I dont get power to is labled B, is this my problem, and if itisnt I need to know how to test the module, with ohms? Or?
Was this
answer
helpful?
Yes
No
Tuesday, November 23rd, 2010 AT 1:35 AM

Please login or register to post a reply.

Sponsored links