SPONSORED LINKS

1990 Isuzu Truck cylinder lock

Tiny
BRASSMAN
  • MEMBER
  • 1990 ISUZU TRUCK
  • 2.6L
  • 4 CYL
  • 2WD
  • MANUAL
  • 82,000 MILES
How to remove old cylinder lock
key will not turn on in cylinder Trying to replace cylinder lock, but I can't get old cylinder out.
Need help on removing old cylinder. How do I remove it.
I was told by auto parts sales person that cylinder or key could be worn out. When the key is in cylinder the cylinder is very loose and wobbly.
SPONSORED LINKS
Thursday, January 23rd, 2014 AT 3:58 PM

2 Replies

Tiny
MLDANIELS2000
  • MECHANIC
  • 227 POSTS
Disconnect negative battery cable. Remove column shrouds and lower instrument panel trim panel. Disconnect ignition switch 6-wire and 2-wire harness connectors and remove tie-straps retaining harness to column. Remove ignition switch retaining screw from ignition switch/column lock assembly. See Fig 1. Remove ignition switch. To install, reverse removal procedure. Ensure proper operation of steering lock and ignition switch mechanism.
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, January 23rd, 2014 AT 8:51 PM
Tiny
MLDANIELS2000
  • MECHANIC
  • 227 POSTS
Did the diagrams help?
Was this
answer
helpful?
Yes
No
+1
Monday, January 27th, 2014 AT 11:54 AM

Please login or register to post a reply.

Sponsored links