SPONSORED LINKS

1990 GMC C2500 starter replacement

Tiny
GUNSTAR
  • MEMBER
  • 1990 GMC C2500
  • 5.7L
  • V8
  • 2WD
  • MANUAL
  • 230,000 MILES
I am replacing my starter and positive battery cable, but as soon as I connect the both battery cables the starter turns over, no key in ignition, truck in neutral.
Monday, March 17th, 2014 AT 2:13 PM

1 Reply

Tiny
JDL
  • MECHANIC
  • 16,098 POSTS
You might check the starter S terminal, The voltage for that terminal comes from ignition switch. Check for voltage on that circuit, could be issue with ignition switch or that circuit is shorted to voltage.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 17th, 2014 AT 2:41 PM

Please login or register to post a reply.

Related Starter Replace/Remove Content

Starter Replacement
VIDEO
Starter Replacement
Instructional repair video
Starter Motor Replacement
GUIDE
Starter Motor Replacement
A starter motor is a high torque motor that utilizes a small pinion gear to contact the flywheel and a starter solenoid to initiate the electrical connection when the...

Sponsored links