no power going to my ignition to my starter at all, whats wrong?

1989 CHEVROLET TRUCK
201,000 MILES
Avatar
MAGURN95
  • MEMBER
  • 9 POSTS
My windows dont work, radio dont work , ignition dont work, I had a motor taken out of my plow truck, and put in my truck now and i put in a 3 inch body lift while that was going on all wires are hooked up but no power to turn it over, turning signals dont work along with my radio, ignition, steering column windows, the only thing that works is my headlight switch
May 25, 2012 at 8:16 PM
Advertisement
Avatar
DJCL
  • CAR REPAIR CONTRIBUTOR
  • 767 POSTS
which engine do you have ?
May 25, 2012 at 8:22 PM
Avatar
MAGURN95
  • MEMBER
  • 9 POSTS
i have a 350 fuel injection
May 25, 2012 at 8:29 PM
Avatar
DJCL
  • CAR REPAIR CONTRIBUTOR
  • 767 POSTS
start with checking the red wire @ the ignition switch for 12 volts all the time. if its there then check for 12 volts @ the ppl wire when cranking. if you dont have the 12 volts @ the red wire . trace it back to the battery. there are 2 fusibal links in line off the battery that feed the ignition switch.
May 25, 2012 at 8:41 PM
Avatar
MAGURN95
  • MEMBER
  • 9 POSTS
Alright ill do that tomorrow, its raining today. But if i need you help tomorrow i hope u respond back ive been trying to figure out this problem for the last month. im on a tight budget so i cant just higher some1 so your help is gratefully thanked. Like i said i will talk to you tomorrow.
May 25, 2012 at 8:45 PM
Avatar
DJCL
  • CAR REPAIR CONTRIBUTOR
  • 767 POSTS
let me know how it works out
May 25, 2012 at 8:48 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.