88 Saab cranks, no start

1988 SAAB 900
200,000 MILES • 4 CYL • FWD • MANUAL
Avatar
RSTURNEY
  • MEMBER
  • 4 POSTS
Where is the cam position sensor on my 1988 Saab - Fuel and distributor components have been replaced. Still no start - fuel pressure good to the rail.
Nov 15, 2010 at 8:18 PM
Advertisement
Avatar
DR LOOT
  • CAR REPAIR CONTRIBUTOR
  • 2,311 POSTS
no one is answering your question so I will give you some hints, try checking the front harmonic balancer pulley, if it is not there check the bell housing it will be easy to detect there should be an 8mm Alan bolts holding it on.
Nov 16, 2010 at 7:20 AM
Avatar
MASTERTECH
  • MEMBER
  • 11 POSTS
Ok sorry I'm giggling to myself......
Is it 8v or 16v ?
Check fuel pump fuse and relay
Check spark at king lead and plugs
Let me know your findings
Nov 21, 2010 at 9:51 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.