No start issue

1987 MAZDA B2200
4 CYL • 2WD • MANUAL
Avatar
MADAZ87
  • MEMBER
  • 2 POSTS
I rebuilt a 2.2 Mazda truck engine, it get gas and its firing on # 1. good compression vales are closing but it won't hit in order to start.
Apr 15, 2011 at 2:34 PM
Advertisement
Avatar
RASMATAZ
  • CAR REPAIR CONTRIBUTOR
  • 75,992 POSTS
Verify the firing order and also if the choke is opening.
Apr 15, 2011 at 3:15 PM
Avatar
MADAZ87
  • MEMBER
  • 2 POSTS
Yes, the firing order is right counter clock on dic turning and 1234 is wired up, choke is working good.
Apr 15, 2011 at 3:48 PM
Avatar
KASEKENNY
  • CAR REPAIR CONTRIBUTOR
  • 18,907 POSTS
Just to jump in on this. I understand this is an old post, but I suspect the firing order that you have is the issue. The 2.2L has a firing order of 1-3-4-2 and it goes clockwise when looking at the distributor. So, it looks like you may have an issue here that could cause the engine to not fire.

Let's start with this and go from there. I am attaching the info from the manual that shows this as well.
Image (Click to enlarge)
Attached Media
May 21, 2022 at 6:09 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.