SPONSORED LINKS

I have a 85 chevey k10 1/2 ton I replaced the.

Tiny
DLCW
  • MEMBER
  • 1985 CHEVROLET SILVERADO
  • 23,000 MILES
I have a 85 chevey k10 1/2 ton I replaced the master cylinder and both wheel cylinders in back and cant get them to bleed and front keeps letting out air bubbles lots of bubbles what do I need to do
Saturday, January 19th, 2013 AT 2:13 PM

4 Replies

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Keep bleeding till all the air is out of the system. It takes time and patience.

Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 19th, 2013 AT 3:03 PM
Tiny
DLCW
  • MEMBER
  • 2 POSTS
K how about the back
Was this
answer
helpful?
Yes
No
Saturday, January 19th, 2013 AT 4:18 PM
Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Make sure the rears are adjusted correctly and keep bleeding them as well.

Roy
Was this
answer
helpful?
Yes
No
Saturday, January 19th, 2013 AT 4:29 PM
Tiny
DLCW
  • MEMBER
  • 2 POSTS
I can't get them to bleed at all
Was this
answer
helpful?
Yes
No
Sunday, January 20th, 2013 AT 5:11 PM

Please login or register to post a reply.

Related Wheel Cylinder Replace/Remove Content

VIEW MORE

Sponsored links