Is my flywheel too tight?

Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Check tooth count on both starters, I have come across this problem with some Ford's and Toyota's.
Was this
answer
helpful?
Yes
No
Sunday, August 5th, 2012 AT 12:50 PM
Tiny
PATM
  • MEMBER
  • 16 POSTS
Ok so I took it all back apart and the torque converter is hard to turn, could it have came unseated?
Was this
answer
helpful?
Yes
No
Sunday, August 5th, 2012 AT 6:53 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If the torque converter doesn't line up with teh oil pump in the trans you will break the pump gears and the tarans won't work. It will be kind of hard to turn by hand. Make sure it is seated all theway in thoughbefore installing.
Was this
answer
helpful?
Yes
No
Sunday, August 5th, 2012 AT 8:50 PM
Tiny
PATM
  • MEMBER
  • 16 POSTS
I think the pump is broken I can not get the torque converter to move in either direction now
Was this
answer
helpful?
Yes
No
Sunday, August 5th, 2012 AT 9:39 PM
Tiny
PATM
  • MEMBER
  • 16 POSTS
Can I replace the pump or is the whole trans shot now? It was never ran like this and all gears seem to work still e.G. Park, neutral ect
Was this
answer
helpful?
Yes
No
Sunday, August 5th, 2012 AT 9:45 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Not being a trans guy you are kind of asking for trouble. Youcan take the pump out and apart and replace th pump inside, but there are rings that must be put on if you just get another one. If everything seems to work ok then you probably haavn'e hurt the pump just be careful that's all. It will turn harder when the converter is in place.
Was this
answer
helpful?
Yes
No
Sunday, August 5th, 2012 AT 11:26 PM
Tiny
PATM
  • MEMBER
  • 16 POSTS
Thanks for the help, I have a feeling with my luck I screwed everything up and need a whole new transmission now :(
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 12:15 AM
Tiny
PATM
  • MEMBER
  • 16 POSTS
I guess 50 bucks to the junkyard it goes, shame too only 63000 miles, no rust and engine ran great oh well I guess you live and you learn
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 12:16 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If you would have takent this to a pro to begine with you would have saved a ton of money and aggravation.
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 12:16 AM
Tiny
PATM
  • MEMBER
  • 16 POSTS
I know this but I did not have the money to pay to have it done in the first place or I would have, and all I spent out was 40 bucks for a starter.
Was this
answer
helpful?
Yes
No
Monday, August 6th, 2012 AT 12:24 AM
Tiny
PATM
  • MEMBER
  • 16 POSTS
So it was just the battery had a bad cell put a new one in fired right up somehow none of us thought of that? Weird, car runs and drives great like it did before
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 10:30 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
That's because you never gave a really good description of the problem.
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 11:28 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,758 POSTS
Right, your answer is only as good as your question.
Was this
answer
helpful?
Yes
No
Sunday, August 26th, 2012 AT 11:33 PM

Please login or register to post a reply.

Sponsored links