SUPREME HOW TO REPLACE A NOISY REAR AXLE BEARING
1981 Oldsmobile Cutlass • 6 cylinder 2WD Automatic • 94,800 miles
1981 Olds Cutlass Supreme , mileage: 94,800. What has to be done to replace a noisy rear axle bearing? It is the type of rear that has the pinion-locking shaft with the small lock bolt and the C-locks on the inside ends of the axles.
The axles are retained by a "C" clip in the differential. Remove the axle and then remove the wheel bearing from the housing. Install in reverse order.
How do i replace the front drivers side drive axle of my 07 subaru outback automatic 2.5i?
1 answer • 2007 Subaru Outback
I have a 2002 gmc sierra 4x4, the front wheels will not engage when i put it in 4wd. i have a 2 inch leveling kit on the front thats the only mod. the axles are fully engaged with the...
1 answer • 2002 GMC Sierra • 125,000 miles
1998 ford f-150 right rear axle , 2 wheel drive club cab. how do i remove the right rear axle and what else should be done while its apart. it was in an accident and appears to be bent.
1 answer • 1998 Ford F-150 • 200,000 miles