Change rear disk pads

Tiny
RICHC
  • MEMBER
  • 2006 MAZDA TRIBUTE
  • 6 CYL
  • 2WD
  • AUTOMATIC
How do I change rear disk pads 2 wheel drive?
Saturday, January 8th, 2011 AT 9:04 PM

5 Replies

Tiny
SEVAG P
  • MECHANIC
  • 405 POSTS
Hello,

Mazda Tribute and the Ford Escape 2006 designed in the same platform the use similar brake system concept. check the instructions below.

check our guide below how to replace rear brake pads and rotors.

https://www.2carpros.com/articles/how-to-replace-rear-brake-pads-and-rotors

Check the diagrams below that can help the replacement of rear pads and discs.

let us know if you need more help.

thank you.

Was this
answer
helpful?
Yes
No
Thursday, February 11th, 2021 AT 10:18 AM
Tiny
GREGORY DUNCAN
  • MEMBER
  • 1 POST
  • 2005 MAZDA TRIBUTE
  • 2.4L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 170,000 MILES
Upon stopping I have a hard brake pedal and if I have to stop quick it tends to pull generally to the right. What could it be?
Was this
answer
helpful?
Yes
No
Monday, February 22nd, 2021 AT 11:12 AM (Merged)
Tiny
CARADIODOC
  • MECHANIC
  • 33,741 POSTS
Brake caliper not releasing or applying. Stop on a slight incline, shift to neutral, release the brakes, then see if the vehicle creeps down hill on its own. If not, place a block about a foot down hill from one tire, then crawl underneath and open the bleeder screws on the calipers. If doing that lets the brakes release, the best suspect is a constricted rubber flex hose.
Was this
answer
helpful?
Yes
No
Monday, February 22nd, 2021 AT 11:12 AM (Merged)
Tiny
VALKENATOR
  • MEMBER
  • 1 POST
  • 2000 MAZDA TRIBUTE
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 123,000 MILES
What is the process to remove the rear brake drums for inspection of the lining?
Was this
answer
helpful?
Yes
No
Monday, February 22nd, 2021 AT 11:12 AM (Merged)
Tiny
F4I_GUY
  • MECHANIC
  • 3,302 POSTS
If there are any screws in the hub of the drum, remove them first. (However I don't believe there are any)

The drum should then slide off. If it doesn't budge, hit the hub of the drum with a hammer and rotate the drum until it loosens off.
Was this
answer
helpful?
Yes
No
Monday, February 22nd, 2021 AT 11:12 AM (Merged)

Please login or register to post a reply.

Sponsored links