1993 Mazda B2600 Won, t stay running

Tiny
WAYNE PEDERSEN
  • MEMBER
  • 1993 MAZDA B2600
1993 Mazda b2600

Turns over fine but dies right out. Won't stay running. Have replaced fuel pump and filter. Seems to be getting plenty of fuel. If I spray starting fluid into the throttle body, it stays running until fluid is used. Need some ideas what to try next.
Do you
have the same problem?
Yes
No
Friday, December 25th, 2009 AT 6:58 PM

3 Replies

Tiny
RASMATAZ
  • MEMBER
Check and test the fuel pump relay and also check for injector/s pulses.
Was this
answer
helpful?
Yes
No
Friday, December 25th, 2009 AT 7:15 PM
Tiny
WAYNE PEDERSEN
  • MEMBER
The fuel pump seems to be pumping good pressure. Where exactly would I find the relay and how do I check injector pulse?
Was this
answer
helpful?
Yes
No
Saturday, December 26th, 2009 AT 7:14 AM
Tiny
RASMATAZ
  • MEMBER
Disregard the fuel pump relay and check and test the circuit opening relay, for the injectors look for power on the injector harness one of them should have power and also use a noid lite.
Was this
answer
helpful?
Yes
No
Saturday, December 26th, 2009 AT 2:38 PM

Please login or register to post a reply.

Recommended Guides