BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
I have a 1999 GMC YUKON with about 91,000. It has a sticking clunking noise when braking and after the SUV start moving again, please provide any information.
have the same problem?
Tuesday, April 4th, 2006 AT 9:47 PM
Things to check: u-joints, caliper retaining bolts, cv joints if 4x4 and rear diff.
Wednesday, April 5th, 2006 AT 9:16 AM
to post a reply.
Related Brake Stuck On Content
Sticking Noise When Braking
Gmc Yukon 1999, 91,000 When I Brake There Is A Clunk Like Noise Occurring After The Vehicle Has Come To A Stop( An After Effect). As...
Brakes Squeak But Pad Ok
My 2003 Yukon Has Squeaky Brakes. I Removed The Front And Rear Wheel And Looked At The Brake Pads. Both Look Almost As Good As New! The...
Brake Pedal Going To The Floor
I Replaced The Brake Calipers And Master Cylinder And The Pedal Is Still Sinking To The Floor. What Is The Problem?
2000 Gmc Yukon Brake Pedal To The Floor
My 2000 Yukon Xl Break Pedal Suddenly Went To The Floor When I Applied The Brakes. The Master Cylinder Is Full, No Leaks. I Assume The...
1999 Gmc Yukon Pedal Stops Car But Slowly Goes To...
I Took The Car To My Local Service Garage That Has Serviced My Cars For 20 Years. He Says That It Sounds Like The Master Cylinder, So I...
Ask a Car Question. It's Free!
ABS Brake Warning Light On
How to Fix a Brake Pull
Bleed and Flush
Find a car manual for your car
© 1999 - 2018 2CarPros, Inc.