1992 Ford Explorer 4X4

Tiny
CRYSSY
  • MEMBER
  • 1992 FORD EXPLORER
My 4x4 and low range is not working and I am not sure how to make it work :roll:. My truck has the two push buttons on the dash, the lights do not come on when the buttons are pushed but when you push the 4x4 button there is a clicking sound from the back cargo area. Any advice on how to get this working would be great as the weather here is snowing like mad and it is so scary driving the truck without the 4x4
thanks everyone 8)
Do you
have the same problem?
Yes
No
Tuesday, November 28th, 2006 AT 11:01 PM

3 Replies

Tiny
BRUCE HUNT
  • EXPERT
Start with check fuses.
Was this
answer
helpful?
Yes
No
Wednesday, November 29th, 2006 AT 7:28 AM
Tiny
CRYSSY
  • MEMBER
I have checked fuses all good! Whats next?
Was this
answer
helpful?
Yes
No
Wednesday, November 29th, 2006 AT 8:44 AM
Tiny
RANGERMANIAC
  • MEMBER
Thre is a 4 wheel drive motor on the T case it is about as big as a pop can take the motor out and clean the entire inside of it with contact cleaner and lube the bearings with a dry graphite lube and some thin oil you will have to cut wires to get it off but I think there are only three of them Good Luck let me know how it turns out
Was this
answer
helpful?
Yes
No
Wednesday, November 29th, 2006 AT 1:50 PM

Please login or register to post a reply.

Recommended Guides