SPONSORED LINKS

Crankshaft sensor location

Tiny
KATHY622
  • MEMBER
  • 2000 DODGE INTREPID
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 135,000 MILES
Where is the cam sensor and crank sensor on the car?
Tuesday, January 20th, 2009 AT 3:26 PM

17 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
The crankshaft sensor you are looking for is located on the passenger's side of the transmission housing, above the differential housing. The bottom of the sensor sits above the drive plate. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Images (Click to make bigger)
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 20th, 2009 AT 3:33 PM
Tiny
KATHY622
  • MEMBER
  • 2 POSTS
Thanks you I love this site.
Was this
answer
helpful?
Yes
No
+2
Tuesday, January 20th, 2009 AT 3:56 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Good to hear, please use 2CarPros anytime we are here to help.
Was this
answer
helpful?
Yes
No
+2
Tuesday, January 20th, 2009 AT 4:40 PM
Tiny
SERRANOMAGIC
  • MEMBER
  • 1 POST
  • 2000 DODGE INTREPID
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 136,000 MILES
Engine light came on. Went to Auto Zone to have it put on machine. Machine said crank position sensor was malfunctioning. I baught one, but I don't know where it goes. Can you help?
Was this
answer
helpful?
Yes
No
+2
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
BLUELIGHTNIN6
  • MECHANIC
  • 16,542 POSTS
Your vehicle's crankshaft position sensor is located on the right side of the transmission housing.

2.7L shown, others similar


https://www.2carpros.com/forum/automotive_pictures/261618_Graphic_314.jpg

SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
CAROLYNN652010
  • MEMBER
  • 1 POST
  • 2000 DODGE INTREPID
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 130,000 MILES
I have opportunity to buy this vehicle but want to know how much repair of the crankshaft sensor costs. Thank you very much!
Was this
answer
helpful?
Yes
No
+2
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
DOCFIXIT
  • MECHANIC
  • 18,828 POSTS
Car average value $150 cost of crankshaft sensor.
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
RONAELE
  • MEMBER
  • 3 POSTS
  • 1999 DODGE INTREPID
Electrical problem
1999 Dodge Intrepid 6 cyl Front Wheel Drive Automatic

car starts and stays running till it warms up then the check engine light comes on then it shuts off.
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Have the computer scanned for code/s-you have a problem within the engine management system that caused the CEL to turn on-This is your starting point of diagnosis, finding out what's going on.
Was this
answer
helpful?
Yes
No
+1
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
When you do get it scanned comeback with the code/s and we'll proceed from there. BTW TY
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
What's the deal with the CPS how did you came about it? Did you get a code for it-A problem with it will cause a not start/misfiring if its going whack
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:47 PM (Merged)
Tiny
JESS0707
  • MEMBER
  • 1 POST
  • 1999 DODGE INTREPID
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 112,000 MILES
Will like to know specifily where is the position where the cranshaft is located to replace sensor.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:48 PM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,179 POSTS
If you have a 3.2L or 3.5L, it on the passanger's side of the transmission housing above the differential.

Let me know if this helps.

Joe
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:48 PM (Merged)
Tiny
PIERCESCTT6
  • MEMBER
  • 9 POSTS
  • DODGE INTREPID
I have a 94 dodge intrepid 3.3l I replaced coil, alternator, and crankshaft position sensor and I still dont have spark. Anything else it could be?
Was this
answer
helpful?
Yes
No
+2
Wednesday, October 23rd, 2019 AT 1:49 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
The computer coil driver tells the coil to fire the plugs.

Try this while cranking engine over listen to the injector/s are they clicking. Also when key is in On position do you hear the fuel pump. I need to know this before we continue
Was this
answer
helpful?
Yes
No
+1
Wednesday, October 23rd, 2019 AT 1:49 PM (Merged)
Tiny
PIERCESCTT6
  • MEMBER
  • 9 POSTS
Is there a specific name for that coil driver
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:49 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Its integral with the car's computer
Was this
answer
helpful?
Yes
No
Wednesday, October 23rd, 2019 AT 1:49 PM (Merged)

Please login or register to post a reply.

Related Crankshaft Sensor Location Content

VIEW MORE

Sponsored links