1995 CHEVY S-10 STARTER

  • Tiny
  • kammi311
  • 1995 Chevrolet S-10

Electrical problem
1995 Chevy S-10 6 cyl Two Wheel Drive Automatic 158000 miles

I am trying to change out my starter and I can not get it actually removed from the truck? It is completely disconnected and unbolted but it is such a small space it doesn't fit through. Any ideas or help would be great?

Saturday, March 27th, 2010 AT 1:51 PM

1 Answer

  • Tiny
  • rasmataz
  • Member

Place the vehicle on a hoist.

Negative battery cable.
Brush end mounting bracket (if equipped).
Solenoid wiring.
Raise the vehicle.
Skid plate (if equipped).
Bolts and the two brackets holding the brake pipe to the crossmember.
Crossmember (three bolts on each side).
Bracket holding the transmission fluid cooler lines to the flywheel housing, brace rod to the flywheel housing, and/or the lower flywheel housing if necessary.
Two bolts holding the starter to the engine.
Starter and the shim (if equipped).

Was this
answer
helpful?
Yes
No
Saturday, March 27th, 2010 AT 2:05 PM

Please login or register to post a reply.

Similar Questions