BECOME A MEMBER
Sign up with Facebook
I agree to the
Login with Facebook
NOT A MEMBER?
1966 Chevy Nova compression values
1966 CHEVROLET NOVA
I have a std bore 327 w/flat top pistons & dual valve relief. The heads are double hump #462, have not been machined or shaved.
What compression values should I have, i.E. 140 psi to 150 psi?
have the same problem?
Monday, January 12th, 2009 AT 6:33 PM
That would be excellent readings
Tuesday, January 27th, 2009 AT 9:43 AM
to post a reply.
Related Engine Compression Content
1969 Chevy Nova Leaking Compression
Engine Mechanical Problem 1969 Chevy Nova V8 Two Wheel Drive Automatic How Would I Fix A Head That Is Leaking Compression From The...
Engine Cylinder Compression Test - All Cars
Instructional repair video
A car's engine needs cylinder compression to run correctly. This compression is caused by the engine pistons traveling upward to the top of the cylinder bore and then...
1966 Chevy Nova Wont Start
My Car Has No Power At All. Bought New Battery, Alternator Is Good, New Voltage Regulator New Fuses. I Am Stumped On This One
What's Wrong With My Nova?
My '66 Starts Fine And Runs Fine With A Little Rough Idle. Recently When Put Into Drive It Stalls On Acceleration. It Starts Right Back Up...
1986 Chevy Nova Engine Will Not Idle Down
I Have Tried Adjusing The Idle And Changeing Air Filter And Pcv Valve, I Also Looked At All My Vacum Lines To Insure I Did Not Have One Off...
Car Will Not Start
I Replaced The Head In My 76 Nova Which Is A L6. Its Turning Over But Not Starting. I Checked The Vacuum Hoses And Installed A New Battery....
Ask a Car Question. It's Free!
Compression Test Without Gauge
Low Compression Symptoms
Find a car manual for your car
Terms & Conditions
© 1999 - 2018 2CarPros, Inc.