Drive Train Axles Bearings problem
1990 Chevy Astro 6 cyl All Wheel Drive Automatic 190000 miles
I replaced the passenger side front hub/bearing assembly, and axle/cv joint. I also put new rotors, calipers, pads and shocks on. Every thing works great except when going about 50-70mph and decelerate there is a bad vibration until mph gets below about 50. This did not happen before I replaced these parts, but there was other noises and vibrations that are not there now. I'm wandering if it could be a bad cv joint. All the parts were new, not used or rebuiilt (except for the calipers).
have the same problem?
Sunday, February 8th, 2009 AT 10:55 AM