To mount an Emergency Dash light

Tiny
WILKIE1968
  • 2012 AUDI A3
  • 3,500 MILES

I have a new 2012 A3 TDi, I want to mount a Emergency light to the front dashboard just between the air vents. I had two sided tape that did not last, and the dealer gave me some sort of black putty which just left a black mark on the dash and didn't hold the weight of the light. There is a metal mounting system that must get stuck to the dashboard and the light is attached to that using a magnet. I have a clear epoxy I was going to use, I plan to keep the car for about 8 ot 9 years if I can. Will the expoxy work? Or should I try to get stronger two sided tape?
KW

Do you
have the same problem?
Yes
No
Sunday, June 10th, 2012 AT 12:55 PM

1 Reply

Tiny
ASEMASTER6371
  • EXPERT
  • 25,554 POSTS

I would go with the epxoy. Try it to see if it bonds to the dash. If not I have had good sucess with gorilla glue which bonds to anything.

Roy

Was this
answer
helpful?
Yes
No
Sunday, June 10th, 2012 AT 1:01 PM

Please login or register to post a reply.

Other Dashboard Light Stay On Questions