2008 Chevrolet Silverado Check Engine Light

2008 CHEVROLET SILVERADO
60,000 MILES
Avatar
BMAGYA4EVER
  • MEMBER
  • 2 POSTS
I have a 2008 Chevy Silverado, V-8, and the "Check Engine" light came on a few days ago. The OBD-II test came out with a "P0442" reading. I had not recently put gas in the truck, but checked the gas cap anyway and it appeared to be fine. I purchased a new gas cap ($12), filled the tank and the light still did not turn off. I have driven it several times since then with no success of the light turning off. Do I need to have the light reset, or what is my next step in finding the problem?
Oct 1, 2013 at 9:40 PM
Advertisement
Avatar
SATURNTECH9
  • CAR REPAIR CONTRIBUTOR
  • 30,869 POSTS
have the code cleared with a.scan.tool and see if the code returns. This gudie can help you

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run down this guide and report back.


Apr 14, 2021 at 6:39 PM
Avatar
BMAGYA4EVER
  • MEMBER
  • 2 POSTS
I don't have a personal scan tool. Can a place like Auto Zone clear the scan for free or will it cost to have the code cleared at a mechanic shop? I know some vehicles can clear codes by turning the ignition key to the "on" position several times. Can I do this with my truck?
Apr 14, 2021 at 6:39 PM
Avatar
SATURNTECH9
  • CAR REPAIR CONTRIBUTOR
  • 30,869 POSTS
if.you don't live in California auto zone can.clear them for.free.It's best to clear it with code.reader.You get a.basic.code reader on.amazon.for. 20
Apr 14, 2021 at 6:39 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.