Front passenger side wheel speed sensor

ROCK13979

MEMBER
2010 FORD FUSION
3.5L
6 CYL
2WD
AUTOMATIC
100,000 MILES

My car front passenger side wheel sensor needs to be replaced can you help?

Thursday, August 20th, 2020 AT 2:13 PM

3 Replies

ASEMASTER6371

MECHANIC
52,797 POSTS

Good morning,

I attached the procedure below for you for the repair.

https://www.2carpros.com/articles/how-to-replace-an-abs-wheel-speed-sensor

Roy

Removal and Installation

With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02 .
Remove the fender splash shield. For additional information, refer to Section 501-02 .
Disconnect the wheel speed sensor electrical connector.
Remove the wheel speed sensor harness bracket-to-body bolt.
To install, tighten to 7 Nm (62 lb-in).
Detach the wheel speed sensor harness from the wheel knuckle bracket.
Remove the wheel speed sensor bolt and the wheel speed sensor.
To install, tighten to 23 Nm (17 lb-ft).
To install, reverse the removal procedure.

Image (Click to make bigger)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Friday, March 12th, 2021 AT 5:39 AM

JBYERSFORD

MEMBER
1 POST
2007 FORD FUSION
V6
AUTOMATIC
59,000 MILES

Ok, so recently I got a new left rear tire speed sensor, for my last one was broke, and my ABS and tracking would not kick in. Got it fixed at a local Ford Garage Saturday, everything seemed good. Today, driving home from work the light went back on, I want to do the job myself this time, I want to do all the wheel sensors

Was this

answer

helpful?

Yes

No

Monday, March 29th, 2021 AT 10:31 AM (Merged)

KASEKENNY

MECHANIC
18,907 POSTS

Here is a guide that will help with this:

https://www.2carpros.com/articles/abs-wheel-speed-sensor-test

Below you will find the process from the manual that will help with getting the front and rear sensors replaced.

Please let us know if you have other questions. Thanks

Images (Click to make bigger)