I just swapped an engine in my 2005 Saturn Relay and now I do not have a signal from my transmission and the shift indicator light is not on. I checked the coonector at the trans to see if any pins were pushed in and the connector looks good. I could not find any blown fuses either. What can I check to see if I have power going to the trans. My Saturn will not crank over. Any assistance would be greatly appreciated.
have the same problem?
Tuesday, February 22nd, 2011 AT 3:02 PM
IF the problem started after the engine replacement, there has to be a pinched or broken wire to the trans. Recheck to make sure nothing was pinched. Also, check main fuses under the hood.