WONT START

  • Tiny
  • Anonymous
  • 2005 Hyundai Santa Fe
  • 220,000 miles

Wont start. Stopped running while driving, no signs before it stopped. 2.7 liter v6. Have spark in atleast the front 3 cylinders. I have fuel to the fuel rails with good pressure. Changed camshaft sensor, with no change. Car rolls over good. Just no fires at all. Checked all fuses, they look ok. Also no fires when I apply ether. Can I have spark at the test outside of the cylinder and then no spark when in the cylinder. Could cylinder be to wet to fire. When I take out plug it is wet, but will still spark when grounded outside of cylinder. This is daughters vehicle and she let the battery run down. No codes to look at.

Thanks for your help.

Friday, March 1st, 2013 AT 1:18 PM

1 Answer

  • Tiny
  • ASEMaster6371
  • Expert
  • 25,502 posts

Check the timing belt. Compression test as well.

What is the actual fuel pressure?

Roy

Was this
answer
helpful?
Yes
No
Friday, March 1st, 2013 AT 1:29 PM

Please login or register to post a reply.

Similar Questions