My transmission light came on one day while driving to Va. I noticed my speed stalls in shifting once I get to 25-35 mph. Along with, follows a "Kick" once it hits those speeds but runs smoothly afterwards. I checked my fluid level and the levels were high but not low as I feared. What should I do? Can I get an applicable suggestion this time, please?
Next step after making sure you fluids OK
is to check for codes
codes should indicate to the troubled area and the reason
let me know what you have for code s
December, 6, 2010 AT 1:02 AM
May be an electrical problem, as the check light came on get a scan done to check for any unresolved fault codes, start here.
December, 6, 2010 AT 1:19 AM
Where/How do I get the code?
December, 6, 2010 AT 1:22 AM
Need an OBDII reader to get codes
a scanner tool to get the tranny data and codes
most local part stores in the states can help in getting you the codes
some have the service for free
December, 6, 2010 AT 1:27 AM
Okay, so how can I find out without having to pay outta pocket, with whats wrong with mny Transmission?
December, 6, 2010 AT 1:31 AM
Do you live in the USA
if so take it to your local part store and ask them to check it for codes
if you live out side the states Sorry have no idea
December, 6, 2010 AT 12:20 PM
I'm in the US, in NC. Thank you. I was just wondering what could possibly be the most common problem is my fluid levels are fine but with it being the winter season. Is this common and not much to worry about.
December, 7, 2010 AT 12:33 AM
Its not common and its an indication of troubles to come