CD4E SHIFTING 2-3 SLIPPLING WHEN HOT TRANNY, GEARS SOFT

  • Tiny
  • prokudanov@mail.ru
  • 2005 Ford Escape
  • 67,000 miles

Hello,

The problem Ford Escape 3.0
Battery dead then slipping on the shifting form 2-3 gear.
No DTC codes appears.
Rebuilt with:
- Master repair kit (seals frictions, gaskets, pistons etc.)
- New solenoid body
- New valve body
- New filter and almost all details in pump
- New planetary.

The result: when cold tranny (approx 10 min after start) everything OK
When hot tranny 2-3 slipping, other 1-2, 3-4 soft shift

What is wrong and where to find problem?

Monday, May 14th, 2012 AT 1:19 PM

3 Answers

  • Tiny
  • hmac300
  • Expert
  • 42,126 posts

If you didn't usea pro type scanner it won't pickup trans codes. You really need to take this to a tranny guy and get a good diagnosis from him. Thie can be almost anything, to maybe not engouhg plates were installed, a seal could be curled and leaking to a cracked case.

Was this
answer
helpful?
Yes
No
Monday, May 14th, 2012 AT 2:38 PM
  • Tiny
  • prokudanov@mail.ru
  • Member

The problem that all this done in tranny repair shop with tranny experienced guys. The scanner used for diagnosis is professional from Ford dealer in Minsk (Belarus). The plates are new, three times checked and adjusted clearance between plates. Seals and gaskets are new as well. I want to emphasize that before repair 2-3 slipping all the time, after repair only on the hot tranny

Was this
answer
helpful?
Yes
No
Tuesday, May 15th, 2012 AT 7:36 AM
  • Tiny
  • hmac300
  • Expert
  • 42,126 posts

Then if they did it take it back as it should be under warranty and no need for you to be messing around with it.

Was this
answer
helpful?
Yes
No
Tuesday, May 15th, 2012 AT 1:47 PM

Please login or register to post a reply.

Similar Questions