Does this sounds like the fuel pump gone out?

Tiny
DAMIEN12
  • MEMBER
  • 2004 SATURN ION
  • 90,000 MILES
2004 Saturn: I cranked at work and the service engine came on, but went out before I could drive off the property. I picked up my son, headed home and just before I was at my driveway, the car
Stopped accelerating when I hit the gas. It was still running, battery is strong. When I try and crank now, it turns over strong, but wont start. I'm not a mechanic so I can't speculate, but that's what happened
Tuesday, July 17th, 2012 AT 4:01 AM

11 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
You will have to check for spark?Actual fuel pressure etc?Thats your starting point.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:15 AM
Tiny
DAMIEN12
  • MEMBER
  • 17 POSTS
Ok thanks
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:18 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
You can try this one have someone try to start it while your smacking the center of the gas tank with the palm of your hand. They rent fuel pressure gauges at auto zone.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:21 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
First use starting fluid spray it in the intake does it try to start? Most parts stores will read your codes. Check the fuel pressure. Rent a gauge at the parts store.U can start here.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:29 AM
Tiny
DAMIEN12
  • MEMBER
  • 17 POSTS
But would the fuel pump going out make the check engine light come on?
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:32 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
With it not running doesnt do it much good for code checks at the auto parts store.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:34 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Usually when the fuel pump goes out on those it doesnt set any codes.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:38 AM
Tiny
DAMIEN12
  • MEMBER
  • 17 POSTS
I didnt think it would set a code but im thinking maybe it could be a crankshaft sensor its a friend of mines car so I really cant really see whats going on I just want too give him a estimate of whats going on
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:42 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
With a code reader that displays some live engine data you could read the codes and if it was a bad crankshaft sensor you could watch engine rpm on the code reader while cranking the engine. Check for spark if no spark you can check the crankshaft sensor with a multimeter.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 4:48 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
Remember he cant get to a code reader the car wont run.
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 6:29 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
I was saying free code checks at the auto parts store like you said wasnt a option when the car doesnt run. Doesnt mean someone cant buy a code reader?
Was this
answer
helpful?
Yes
No
Tuesday, July 17th, 2012 AT 8:00 PM

Please login or register to post a reply.

Sponsored links