This is my second question. 2004 Montana engine cooling fan problems.

Tiny
DAVIDALAN
  • 2004 PONTIAC MONTANA
  • 199,352 MILES

Fans work with air conditoining on, and thay work when I disconnect the temp. Sensor. Relays and fuses are ok. I put a new temp. Sensor in. When I unplug the temp. Sensor I get 5 volts at the leads from the ECM. And the temp. Gauge on the dash goes to bottom (cold), and when I jumper the temp. Sensor connection leads the temp. Gauge on the dash doesn't go hot. (I think it is supposed to). The temp. Sensor ohms are around 4.35 cold and 2993 when hot. I get no trouble codes.

Thanks again;
Davidalan

Do you
have the same problem?
Yes
No
Sunday, March 25th, 2012 AT 7:26 PM

1 Reply

Tiny
RASMATAZ
  • MEMBER

-See below Fan EWD

Was this
answer
helpful?
Yes
No
Sunday, March 25th, 2012 AT 7:37 PM

Please login or register to post a reply.

Other Fan Relay Questions