SPONSORED LINKS

Hood won't close or open

Tiny
ERICRMILITELLO
  • MEMBER
  • 2009 CHRYSLER PACIFICA
  • 100,000 MILES
When closing the hood it will not latch all the way down. I know I need to move the latch mechinism but I am unable to get it to work. The safety latch will work but won't close the rest of the way. I am able to get the latch to stay down with out the hood down and release it as well. But the hood will not close when pushed or dropped
SPONSORED LINKS
Tuesday, October 15th, 2013 AT 6:18 PM

5 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 42,798 POSTS
Yep is sounds like you need to loosen the bolts and move it up slightly. Here is a guide (below) to help you get it fixed.

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken
Image (Click to make bigger)
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+3
Friday, September 8th, 2017 AT 1:31 PM
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,542 POSTS
  • 2004 CHRYSLER PACIFICA
  • 155,000 MILES
Hood latch cable broken how can I open hood
Was this
answer
helpful?
Yes
No
Wednesday, July 1st, 2020 AT 11:57 AM (Merged)
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 108,117 POSTS
You need to raise the car in the air, then using a long screwdriver activate the latch, I attached a picture of the latch below so you can see where the cable attaches, that's the part you need to move to unlatch the hood
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 1st, 2020 AT 11:57 AM (Merged)
Tiny
LELEATC
  • MEMBER
  • 1 POST
  • 2006 CHRYSLER PACIFICA
  • 82,000 MILES
I had a glass technician come replace my windshield today while I was at work. I have a 2006 Chrysler Pacifica. Leaving work today, I accelerated and the hood flew up and hit the windshield. Would the technician have had any reason to open the hood? The company is claiming that they usually don't, so they aren't responsible. The hood has NEVER done this before, and it happened just 5 hours after he replaced the windshield.
Was this
answer
helpful?
Yes
No
Wednesday, July 1st, 2020 AT 11:58 AM (Merged)
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
The bonnet would have to be off the safety catch for it to move up, I would ring a different windscreen shop and ask if the bonnet has to be raised on your make to access any trim required to remove the screen.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, July 1st, 2020 AT 11:58 AM (Merged)

Please login or register to post a reply.

Sponsored links