Power steering belt squealing

Tiny
KINGNOBODY1
  • MEMBER
  • 2006 KIA RIO
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 74,132 MILES
Power steering belt squeals when first turn car on initially for a minute. Want to adjust the tension because the belt seems fine. How do I do that?
Monday, January 28th, 2019 AT 10:45 AM

13 Replies

Tiny
SEVAG P
  • MECHANIC
  • 405 POSTS
Hi.

if the belt is in good condition adjust as follow:

Adjustment

1. Loosen the tension mounting bolt (B).
2. Turn the adjusting bolt (C) to obtain the proper belt tension, and then re-tighten the mounting bolt (B).
3. Recheck the deflection of the A/C compressor belt.

this link can help us

https://www.2carpros.com/diagrams/kia/rio/2005

Check out the diagrams (Below). Please let us know what you find.
Was this
answer
helpful?
Yes
No
+1
Monday, January 28th, 2019 AT 11:14 AM
Tiny
KINGNOBODY1
  • MEMBER
  • 3 POSTS
To get to it? Wheel off and inner cover?
Was this
answer
helpful?
Yes
No
Monday, January 28th, 2019 AT 12:43 PM
Tiny
SEVAG P
  • MECHANIC
  • 405 POSTS
Yes, to have complete access you must remove the wheel and the inner cover.
Was this
answer
helpful?
Yes
No
+1
Monday, January 28th, 2019 AT 1:01 PM
Tiny
KINGNOBODY1
  • MEMBER
  • 3 POSTS
Thank you.
Was this
answer
helpful?
Yes
No
Monday, January 28th, 2019 AT 1:24 PM
Tiny
SEVAG P
  • MECHANIC
  • 405 POSTS
You are welcome.
Was this
answer
helpful?
Yes
No
Monday, January 28th, 2019 AT 1:25 PM
Tiny
KAYEWILSON
  • MEMBER
  • 1 POST
  • 2006 KIA RIO
  • 135,000 MILES
We just had a new engine with 75,000 miles put in and now it is making "squealing noises" not just when turning the steering wheel but even when just idleing - guessing it is the power steering belt or power steering pump - all new belts were put on. Any ideas where to start - car runs great with new engine but never had this noise before.
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:57 AM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Checkto seeif tensioner is any good as they should be replaced when belts are. A good test is to spray water on belts if noise goes away replace the tensioners or adjust if no tensioner.
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:57 AM (Merged)
Tiny
MCASTANIEN
  • MEMBER
  • 2 POSTS
  • 2004 KIA RIO
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 104,000 MILES
I have a 2004 kia rio. Two years ago, the timing belt snapped and I had to replace the entire engine. Ever since, I have had trouble with the alternator belt squeaking. I have replaced the alternator itself on the advise of a mechanic and that did not help. I tighten it, and it seems ok for some time, then it squeaks only when I start it and whenI turn the ac on. Then that progressively gets worse to squeaking when I am driving period. Then thebelt snaps, we replace and the whole thing starts again. I am on my third belt now and was told something else is "running slow" and that is causing the belt to keep coming loose. Any ideas what I could check for?
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:57 AM (Merged)
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
You will have to check the alignment of the belt, sounds as if one of the pulleys is not aligned.
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:57 AM (Merged)
Tiny
MCASTANIEN
  • MEMBER
  • 2 POSTS
If it is the alignment of a pulley. Is that something that would be very expensive to have a mechanic fix?
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:57 AM (Merged)
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
This will depend on where that misalignment is, it will have to be inspected first, may be as simple as a wrong alternator fitted.
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:57 AM (Merged)
Tiny
BIGJAY2000
  • MEMBER
  • 1 POST
  • 2003 KIA RIO
Am trying to change my fan belt but my issue is the perfect fit. It makes some noise when I star the engine. I need to know the exact number of the belt to use.4PK?
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:58 AM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
When you replace the belt you have to replace the automatic tensioner as well an dthat may be your problem. If it's a manual tensioner then use a belt tension gauge auto parts may rent them
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2020 AT 11:58 AM (Merged)

Please login or register to post a reply.

Sponsored links