Replacing front bumper cover

Tiny
TED HANSEN
  • MEMBER
  • 2003 CHRYSLER PT CRUISER
  • 4 CYL
  • 2WD
  • AUTOMATIC
I would like step by step instructions to r and r the front bumper cover on a 2003 PT crusier GT
Do you
have the same problem?
Yes
No
Tuesday, November 16th, 2010 AT 8:16 PM

3 Replies

Tiny
TED HANSEN
  • MEMBER
It's a GT model
Was this
answer
helpful?
Yes
No
+1
Tuesday, November 16th, 2010 AT 8:18 PM
Tiny
KHLOW2008
  • EXPERT
FRONT BUMPER FASCIA
REMOVAL

1. Remove Grille Attaching screws.

2. Remove Grille.

3. Remove nuts attaching front bumper fascia to bottom of fender flange.

4. Remove fasteners attaching fascia to fender flange.

5. Remove air dam fasteners from crossmember.

6. Remove splash shield attaching screws.

7. Remove fascia from vehicle.

INSTALLATION
1. Position fascia on vehicle.

2. Install splash shield attaching screws.

3. Install air dam fasteners to crossmember.

4. Install fasteners attaching fascia to fender flange.

5. Install nuts attaching front bumper fascia to bottom of fender flange.

6. Install Grille and attaching screws.
Was this
answer
helpful?
Yes
No
+1
Tuesday, November 16th, 2010 AT 8:34 PM
Tiny
TED HANSEN
  • MEMBER
Thank You Very Much, I wasn't sure if I was going to try this myself, but you've helped to me decide.
Was this
answer
helpful?
Yes
No
Tuesday, November 16th, 2010 AT 9:57 PM

Please login or register to post a reply.

Recommended Guides