trying to position power steering pump out of the way to remove alternator.pump does not want to come out ,upward.
Feb 23, 2013 at 2:49 PM
2003 Chevrolet Venture Trying Position Power Steering Pump Out Way Remove
2003 CHEVROLET VENTURE
DEEZEL600
- MEMBER
- 2 POSTS
- FOLLOW
Advertisement
do not need to remove the pupm for this.
loosen the cradle bolts under the van and let the motor sag down and the alternator comes right out
the pump, the lines need to be released in order for the pump to be removed.
Roy
loosen the cradle bolts under the van and let the motor sag down and the alternator comes right out
the pump, the lines need to be released in order for the pump to be removed.
Roy
Feb 23, 2013 at 2:56 PM
are you refering to the sub frame bolts
Feb 23, 2013 at 4:02 PM
yes, i am
Roy
Roy
Feb 23, 2013 at 4:07 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.