SPONSORED LINKS

Crankshaft sensor location

Tiny
BIGGMIKE
  • MEMBER
  • 2003 NISSAN XTERRA
I have been looking for the crankshaft sensor, I cannot find it. Can you send me picture of where it is at? Thank you
Saturday, February 18th, 2012 AT 12:52 AM

8 Replies

Tiny
DRCRANKNWRENCH
  • MECHANIC
  • 3,380 POSTS
I did not know which engine or setup you have so I am attaching all three diagrams. One is for the four cylinder or 2.2L and the others are for the 3.3L one with and one without a supercharger.

Here is a guide that will show you what you are in for when doing the job and a diagrams below giving you the locations for your engine:

https://www.2carpros.com/articles/crankshaft-angle-sensor-replacement

The location for all models is the same for the Crankshaft Position Sensor, CPS. It can be found at the top of the front of the transmission housing.

Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.

Cheers
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, February 18th, 2012 AT 1:12 AM
Tiny
BIGGMIKE
  • MEMBER
  • 57 POSTS
Thanks I found it.
Was this
answer
helpful?
Yes
No
Tuesday, February 21st, 2012 AT 6:23 PM
Tiny
DRCRANKNWRENCH
  • MECHANIC
  • 3,380 POSTS
You are welcome.
Come back anytime you need us and we will be here to help.

Dr C.
Was this
answer
helpful?
Yes
No
-1
Wednesday, February 22nd, 2012 AT 12:40 AM
Tiny
HEIDI WILSON
  • MEMBER
  • 1 POST
I am having an issue and I am not sure what to do at this point. I will try to be brief as possible. I have a 2003 Xterra supercharged 174,000 miles on it. A year ago the ignition switch went out in it so replaced that, then the alternator was bad put a new one in. Then in April of this year my timing belt broke. I took it to the shop and had that replaced and they checked for internal damage to the engine and thank God no problems. A few weeks later the SES light came on and I had it checked and was told the knock sensor was bad. It was running rough so that got replaced and still have the same rough running engine and loss of power along with the SES light still on. Any idea what could be causing this?
Was this
answer
helpful?
Yes
No
+1
Monday, August 1st, 2016 AT 10:57 AM
Tiny
CORYATENCIO
  • MEMBER
  • 1 POST
  • 2002 NISSAN XTERRA
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 174,700 MILES
Where is the crankshaft position sensor located?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Sunday, September 9th, 2018 AT 5:07 PM (Merged)
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Crankshaft Position Sensor (OBD) (2.4L VIN D)At top rear of engine, on transmission housing.
Crankshaft Position Sensor (OBD) (3.3L VIN E)At top rear of engine, on transmission housing.
Crankshaft Position Sensor (OBD) (3.3L VIN M)At top rear of engine, on transmission housing
Was this
answer
helpful?
Yes
No
+1
Sunday, September 9th, 2018 AT 5:07 PM (Merged)
Tiny
QUICKSILVER72
  • MEMBER
  • 2 POSTS
  • 2000 NISSAN XTERRA
  • 3.3L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 129,000 MILES
I just wanted to know exactly where is the crankshaft sensor on vehicle? Need to change it out, But I do not know where it is exactly.
Was this
answer
helpful?
Yes
No
-1
Sunday, September 9th, 2018 AT 5:07 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
See picture. It is at back by transmission.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+4
Sunday, September 9th, 2018 AT 5:07 PM (Merged)

Please login or register to post a reply.

Related Crankshaft Sensor Location Content

VIEW MORE

Sponsored links