SPONSORED LINKS

No spark at the plugs?

Tiny
JAMSIE119
  • MEMBER
  • 2004 NISSAN X-TRAIL
  • 70,000 MILES
I have a Nissan x trail that just cut out and now there is no spark at the plugs, ive had it on a Nissan diagnostic machine they changed the accelerator camshaft and crankshaft sensors and that cleared all faults but still no spark checked the timing which was off so changed the timing chain and tensioners. Still no spark there is also no signal at the fuel pump but I have checked it is working
SPONSORED LINKS
Thursday, June 21st, 2012 AT 2:17 PM

12 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
There is a ECM relay that goes out as well on the this car. Here is a guide and some diagrams to help you confirm the problem.

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

Please let us know what happens so it will help others.

Cheers
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+4
Thursday, June 21st, 2012 AT 2:49 PM
Tiny
JAMSIE119
  • MEMBER
  • 3 POSTS
Checked the ignition coils there is 3 cables at them one has 12v and the other 2 are both nothing. Charged the battery and used a booster pack with it all connections I tried are 12v but still nothing at the fuel pump or spark plugs
Was this
answer
helpful?
Yes
No
+20
Friday, June 22nd, 2012 AT 7:13 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
If vehicle is equipped wit immobilizer, have it checked. If the transponder is not communicating, the starter would be able to crank but engine would not fire up. If you have a spare key, use it to test.

If not equipped with immobilizer, recheck the crankshaft position sensor. Remove it and check the reluctor for damage. Test wire for continuity between the ignition coil and ECM.
Was this
answer
helpful?
Yes
No
+20
Saturday, June 23rd, 2012 AT 3:14 PM
Tiny
JAMSIE119
  • MEMBER
  • 3 POSTS
I was thinking the immobilizer but not sure if anythin I can do to check it or if I would have to get someone out to do it, when you turn key in ignition the led of dash flashes then goes on steady
Was this
answer
helpful?
Yes
No
+8
Saturday, June 23rd, 2012 AT 5:50 PM
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
The light should go off. That means it is not responding to the immobilizer. A correct scan tool should be able to check it out. As I mentioned, if you have a spare key, try it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+2
Saturday, June 23rd, 2012 AT 8:16 PM
Tiny
KRSGT
  • MEMBER
  • 1 POST
I have solved the issue with the 2005 Nissan xtrail eng xt40 with no spark if any would like to know it was the ECM relay I installed a new one I am off and running.

I love this site.
Was this
answer
helpful?
Yes
No
+29
Sunday, August 6th, 2017 AT 1:29 PM
Tiny
LUKETECH AUTO
  • MEMBER
  • 1 POST
  • 2005 NISSAN X-TRAIL
  • 2.0L
  • 4 CYL
  • 2WD
  • MANUAL
  • 20,000 MILES
Hi guys, out there I am having a problem with my vehicle. When cranking it she wants to take but does not then swings free. Got fuel imob light goes off wen key is on, new sensors.
Was this
answer
helpful?
Yes
No
+5
Monday, August 7th, 2017 AT 3:18 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check fuel pressure with gauge auto parts rent it. See link.
https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator
scan for codes and check crank sensor fuel pressure should be 51 psi.
Was this
answer
helpful?
Yes
No
+2
Monday, August 7th, 2017 AT 3:18 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Messed up on this one. See pictures for checking power from ECM and coils. Also, check fuses under hood.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Was this
answer
helpful?
Yes
No
+3
Monday, August 7th, 2017 AT 3:18 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,815 POSTS
Did you check for trouble codes?
Check the crank position sensor.
Was this
answer
helpful?
Yes
No
+4
Monday, August 7th, 2017 AT 3:18 PM (Merged)
Tiny
GIFT DONNIE
  • MEMBER
  • 1 POST
  • 2007 NISSAN X-TRAIL
  • 2.0L
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 85,000 MILES
There is no current coming to both the injectors and ignition coils. What could be the possible cause?
Was this
answer
helpful?
Yes
No
+10
Monday, March 25th, 2019 AT 11:42 AM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Try resetting your security system if no manual check online. Also check fuses under hood.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, March 25th, 2019 AT 11:42 AM (Merged)

Please login or register to post a reply.

Related No Spark Content

Ignition Spark Check
GUIDE
Ignition Spark Check
An engine's ignition system is responsible for igniting the fuel-air mixture inside the combustion chamber and when the ignition process stops the engine will not run....

Sponsored links