Timing chain cover/ Thermostat housing

Tiny
GOOSEMASTERKL
  • 2002 JEEP LIBERTY
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 94,000 MILES

I'm needing to know how to take off the timing chain cover on my 2002 Jeep Liberty Sport 4x4 w/3.7L V-6 engine. I was going to change my thermostat and the bottom bolt broke off inside. So I guess I'll have to take that cover off to be able to get that stud drilled out and re-tapped. Do I need a puller to remove the harmonic balancer? Thanks

SPONSORED LINKS
Do you
have the same problem?
Yes
No
Friday, August 12th, 2011 AT 7:01 PM

1 Reply

Tiny
PROMECHANIC
  • EXPERT
  • 550 POSTS

You shouldn't need a puller, but you will probably need an air wrench as it will be on very tight.

Was this
answer
helpful?
Yes
No
Friday, September 9th, 2011 AT 9:10 PM

Please login or register to post a reply.

Related Timing Chain Cover Bolt Questions

2002 Jeep Liberty Cold Air Intake

Engine Performance Problem 2002 Jeep Liberty 4 Cyl Two Wheel Drive Manual I Am Having Problems Finding A Cold Air Intake For The 2.4...
Asked by markj127 ·
1 ANSWER
2002
JEEP LIBERTY

2002 Jeep Liberty O2 Sensors

Engine Performance Problem 2002 Jeep Liberty 6 Cyl Four Wheel Drive Manual Is It Normal For All Four O2 Sensors To Diagnose Bad. Heard...
Asked by mappenman ·
1 ANSWER
2002
JEEP LIBERTY

2002 Jeep Liberty Engine Idle

I Bought A 2002 Jeep Liberty Sport With A Blown Motor From A Friend(some Friend). I Had A Local Mechanic Install A New Motor In The Car...
Asked by anthony_j_anderson ·
7 ANSWERS
2002
JEEP LIBERTY

2002 Jeep Liberty Pcm Pinout

My Boss Recently Purchased The Car With A Blown Head Gasket. He Paid Someone To Fix It And In Doing So The Ripped The Wires From The White...
Asked by mbouchard ·
1 ANSWER
2002
JEEP LIBERTY

Recommended articles