3.0 -I REMOVED AFTER BATT INSTALL AND CABLE CLEANING IT WOULDN'T START

2002 Jaguar X-Type

Tiny

Eddy2246

March, 28, 2012 AT 10:49 AM

Iremoved batt to replace the upper radiator hose. I re installed the batt, cleaned the cable ends put the key in no start. Minimal crank and lights came on dash. I reset the key by turning 4x from acc to start and the fuel reset. Same thing. Put the key in start and cranked it over by the solenoid. It cranked but did not fire. Any help would be appreciated. Thank you

FOUND 17 RELATED QUESTIONS

1 Answer

Tiny

hmac300

March, 28, 2012 AT 1:44 PM

Check fuses in your central fuse box and power dist box and see if inertia switch has been set. Inertia switch is on lower right A pillar

Please login or register to post a reply.

Battery Replacement Guide
Battery Replacement Honda Civic 2006-2011
Battery Replacement Ford Contour 1996-2000