2002 FORD RANGER WANT TRUN OVER

  • Tiny
  • adams jack
  • 2002 Ford Ranger
  • 15,000 miles

I put a steering cloum in and had the key reprogrammed, the engine would not turn over. Some of my fuse panel was not working I had no fire to half of it. I got a re flashed brain and put in it and had the key man back out and it still want turn over. Can you help me?

Do you
have the same problem?
Yes
No
Tuesday, September 24th, 2013 AT 2:05 PM

3 Replies

  • Tiny
  • hmac300
  • Expert
  • 44,382 posts

Check batter for condition including load test. Check fuse 24 in dash an dfuse 11underhood. Are all the wires the same as the old column? It may not be the correct column

Was this
answer
helpful?
Yes
No
Tuesday, September 24th, 2013 AT 4:20 PM
  • Tiny
  • adams jack
  • Member

HEY MAN THANKS FOR TRYING, BUT THAT WAS NOT THE ANSER TO MY PROBLEM, ALL WIRES AND PLUGS MATCHED.
THANKS JACK

Was this
answer
helpful?
Yes
No
Thursday, September 26th, 2013 AT 12:04 PM
  • Tiny
  • hmac300
  • Expert
  • 44,382 posts

Try resetting your security system although yours due to the new column nmay need to be reprogrammed for it. Especially after replacing ecm.

Was this
answer
helpful?
Yes
No
Thursday, September 26th, 2013 AT 12:20 PM

Please login or register to post a reply.

Similar Questions